Content Comparison

[root@vtipmi ~]# cd /upgrade
[root@vtipmi upgrade]# scp 192.168.40.1:/your_folder/DA135-PCIE-x8-copper-1.24.0.tgz ./
[root@vtipmi upgrade]# tar xvzf DA135-PCIE-x8-copper-1.4.0.tgz
DA135-PCIE-x8-copper-1.4.0
DA135-PCIE-x8-copper-1.4.0/eeprom.pex
DA135-PCIE-x8-copper-1.4.0/upgrade
DA135-PCIE-x8-copper-1.4.0/fruDA.xml
DA135-PCIE-x8-copper-1.4.0/plx.eeprom
DA135-PCIE-x8-copper-1.4.0/system.ini
DA135-PCIE-x8-copper-1.4.0/version
DA135-PCIE-x8-copper-1.4.0/fruGenMCMC
DA135-PCIE-x8-copper-1.4.0/redriver.bin
DA135-PCIE-x8-copper-1.4.0/vtpcie_ekey.conf
DA135-PCIE-x8-copper-1.4.0/da.conf
[root@vtipmi upgrade]# cd DA135-PCIE-x8-copper-1.4.0
[root@vtipmi DA135-PCIE-x8-copper-1.4.0]# vtipmi stop
Stopping MCMC
Stopping Carrier Manager
Stopping Shelf Manager
Stopping failover agent
Stopping file monitor
Stopping SNMP server
Stopping SNMP trap handler
Stopping ethernet monitor
Stopping execHelper
Stopping Memory monitor
Stopping vtipmi custom
[root@vtipmi DA135-PCIE-x8-copper-1.4.0]# ./upgrade
Backing up /etc/da.conf to /etc/da.conf.bak
Backing up /etc/vtpcie_ekey.conf to /etc/vtpcie_ekey.conf.bak
Creating Daughter Card FRU inventory
warning, no module power information found.
warning, no zone3 compatibility information found.
Updating EEPROM at address 0x50. Please wait ... (try 1)
Verified data in EEPROM 0x50
Erasing the EEPROM...
Resetting the swtich...Done
Writing to EEPROM: Done
Programming PCIe Redriver Configuration EEPROM...

Successfully configured daughter card.  Please power cycle
for the changes to take affect.
[root@vtipmi DA135-PCIE-x8-copper-1.4.0]# vtipmi start
Starting execHelper
Starting heartbeat monitor
Starting watchdog timer
Starting memory monitor
Starting MCMC
Starting Managers
Starting trap handler
Starting vtipmi custom