...
This page shows a top level overview of the status of the selected axis. On this screen we see the following information and controls (all PVs are prefixed with $(device):$(axis) unless indicated otherwise).
- Michael Abbott: Update this page once system has been released
| Title | PV | Description |
|---|---|---|
| System Status | :STATUS | This indicates the aggregate health of the digital processing chain for this axis. Clicking on this will bring up the System Status page where the source of any alarm indication here can be located. |
:SEQ:MODE | This field shows a brief summary of the sequencer setup, in the example above it says "Sweep: all bunches (-42dB)", which means a multi-bunch sweep over all bunches with an excitation strength of -42dB over all bunches. | |
| Feedback Settings | :FIR:GAIN_S | This controls the overall level of FIR gain. |
:FIR:0:PHASE_S | This controls the phase of the FIR filter for FIR #0 | |
:BUN:MODE | This shows a brief summary of the feedback status when the sequencer is not running, in the illustrated example feedback is not active. | |
| Bunch motion standard deviation | :ADC:MMS:STD | This shows the standard deviation of bunch motion for this axis, see Min/Max/Sum for more detail. |
| System | This button brings up the MBF System View providing links to all other control pages. | |
| Tune, Phase | $(prefix):TUNE, $(prefix):PHASE | These two PVs are provided by the tune fitter from the data captured by detector #0. Clicking on this will bring up the Tune Fitting Overview page. |
| Tune Only, Tune Special, Feedback On & Tune | These three buttons will automatically configure the selected axis for feedback and tune sweep as appropriate and as configured. |
...