Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Contents

The I15-1 Sample Position

The sample position on I15-1 is defined in the images below These depict a standard beamline setup, however the position of the detector and beamstop can me changed along the z-axis to optimise Qmin for a given experiment where necessary. The y stage has a travel range of 500 mm, with ca. 170 mm below the beam position and ca. 330 mm above. The x stage has a travel range of ca. 125 mm. With the sample stage set to x = 0 (furthest back), there is a distance of 420 mm between the sample stage and the beamstop arm. The beamstop arm is located ca. 140 mm below the beam position.



    

    



  • No labels