...
This section shows a summary of the setup of each of the four available bunch control banks and provides links to the Bunch Bank Control screen where each bank can be reconfigured. For each bank the following information is shown (each PV prefixed with $(device):$(axis) and n running from 0 to 3).
| Title | PV | Description |
|---|---|---|
| FIR select | :BUN:n:FIRWF:STA | Summary of FIR configuration |
| DAC out status | :BUN:n:OUTWF:STA | Summary of selected DAC output configuration |
| DAC gain | :BUN:n:GAINWF:STA | Summary of DAC output gain configuration |
For each monitored waveform the status report shows one of three things depending on whether individual bunches are have different configurations:
...
This allows the fixed frequency oscillator to be controlled. The following PVs are available, each prefixed with $(device):$(axis):
| PV | Description |
|---|---|
:NCO:FREQ_S | The NCO frequency can be set to any value in units of cycles per machine revolution. |
:NCO:GAIN_S | This is the output gain in steps of 6dB with 0dB representing full scale DAC output. |
:NCO:ENABLE_S | This must be set to "On" for NCO output to be generated. |