This page shows four graphs showing the bunch-by-bunch min/max, difference, mean, and standard deviation for the selected port and channel. This screen is available for ADC and DAC on both X/Y or I/Q channels.
- Michael Abbott: need to update screenshot when have live data available
The following graphs are shown on this screen. Each PV name is prefixed with $(device):$(axis):$(part) where $(part) is either ADC or DAC depending on the data source.
...
At the bottom of this screen we have the following indicators:
| Title | PV | Description | |
|---|---|---|---|
| Turns | :MMS:TURNS | This shows the number of turns used to sample the currently displayed graph. | |
| Mean mean | :MMS:MEAN_MEAN | This is the average of the position of all bunches over the sample period. | |
| Std mean | :MMS:STD_MEAN, :MMS:STD_MEAN_DB | This shows the average value of :MMS:STD, which can be used as a measurement of overall beam motion. The value is also available as a logarithm in dB. | |
| Source | : | MMS:OVERFLOWThis status indicator should always read "Ok". If any other value is indicated then a measurement error has occurred, probably due to a system misconfiguration. Any fault will remain shown until $(part):MMS_SOURCE_S | Shows the currently configured source for this display. |