/
Min/Max/Sum

Min/Max/Sum

This page shows four graphs showing the bunch-by-bunch min/max, difference, mean, and standard deviation for the selected port and channel.  This screen is available for ADC and DAC on both X/Y or I/Q channels.

The following graphs are shown on this screen.  Each PV name is prefixed with $(device):$(axis):$(part) where $(part) is either ADC or DAC depending on the data source.

TitlePVsDescription
Min/Max

:MMS:MIN, :MMS:MAX

Shows minimum and maximum value for each bunch over the sample period (configurable by setting :MMS:SCAN_S.SCAN and measured by :MMS:TURNS).
Difference:MMS:DELTAShows the difference MAX-MIN.  This is the most direct measurement of bunch motion.
Mean:MMS:MEANShows the average bunch position over the sample period.
Standard Deviation:MMS:STD

Shows the standard deviation of the bunch motion over the sample period.  This is a slightly more sophisticated measurement of bunch motion than :MMS:DELTA, which does not show outliers.

Overlaid on this graph we have the following three curves.  These all update at a slower interval, typically configured for every 60s, and are designed for long term archival.


:MMS:STD_MEAN_WFMean value of :MMS:STD over the last archival interval.  So long as :MMS:MEAN does not move this is reasonably close to the overall standard deviation over the archival interval.

:MMS:STD_MIN_WF, :MMS:STD_MAX_WFMinimum and maximum value of :MMS:STD over the last archival interval.

At the bottom of this screen we have the following indicators:

TitlePVDescription
Turns:MMS:TURNSThis shows the number of turns used to sample the currently displayed graph.
Mean mean:MMS:MEAN_MEANThis is the average of the position of all bunches over the sample period.
Std mean:MMS:STD_MEAN, :MMS:STD_MEAN_DBThis shows the average value of :MMS:STD, which can be used as a measurement of overall beam motion.  The value is also available as a logarithm in dB.
Source:$(part):MMS_SOURCE_SShows the currently configured source for this display.

Related content

ADC Setup (version 1.3)
ADC Setup (version 1.3)
More like this
Sequencer and Bunch Control (version 1.3)
Sequencer and Bunch Control (version 1.3)
More like this
Detector Bunch Enables
Detector Bunch Enables
More like this